BC 312

Hydrophone BC 312 underwater/threaded, with 2-wired IEPE — hydrophone with a two-wired IEPE connection; screened and isolated from the environmental impact; monitoring and diagnostics of liquid pipeline systems; inspecting subsurface part of sonar structures. APPLICATION EXAMPLE: High-sensitivity multicomponent phased hydroacoustic systems for signal source detection and localization. Hydrophones BC 312 are dynamic pressure transducers with even response curve throughout the whole range of frequencies observed in any homogeneous medium, including air, sea and fresh water. Hydrophones BC 312 are used to determine explosion pressure in the range up to 1,000 kPa, pulse duration 2-5 ms (time sensitivity: some 0.1 ms). Hydrophones BC 312 are used in hydroacoustics for reading-through underwater signals and noise, for measuring purposes, and also as components of beamed receiver hydroacoustic antennas. Hydrophones BC 312 can be supplied without an integrated amplifier, in such case, it can be used as a sonar transmitter.

Features
Designation: BC 312 | Version: underwater / threaded | Nominal sensitivity: 200 µV/Pa (underwater) / 150 µV/Pa (threaded) | Sensitivity level (rel. 1V/µPa): -192 dB (underwater) / -194 dB (threaded) | Frequency band: 20…20,000 Hz | Self-noise, RMS: 0.02 Pa | Max. measured sound pressure range: 50 kPa | Limit static line pressure: 60 MPa | Output direct voltage level: 10–13 V | Power: IEPE (DeltaTron/ISOTRON) | Supply voltage: +(18–30) V | Supply current: 3 mA | Explosion-proof version: — (underwater) / upon request (threaded) | Casing material: stainless steel | Dimensions (length × casing diameter): 173×⌀23 mm (underwater) / 171×⌀23 mm (threaded) | Coupling thread: — (underwater) / M20×1.5 (threaded) | Cable standard length: 10 m (underwater) / 2 m (threaded) | Max. cable length: 100 m | Cable outer diameter: 10.2 mm | Cable type: coaxial, PVC coating, central wire, screened, sulfuric-acid resistant | Cable plug: BNC | Measurements operation environment: water, air, oil and oil products, natural gas | Operating environment temperature: 0…+60 °C | Environment air temperature: −60…+80 °C

PERSONAL CONSULTATION

Do you have questions about this product or a special application? Get in touch with our experts!

Related Products

Bartington CryoMag (Cryogenic Magnetometer) CryoMag is a three-axis fluxgate magnetometer designed to operate at cryogenic temperatures down to 2K for precision magnetic field measurement in ultra-low temperature environments. See details FFR Free Flooded Rings (M27-x50) FFR Free Flooded Rings are broadband, full-ocean-depth transducers with a toroidal beam pattern used as high-power acoustic sources and underwater communications transducers. See details Environment Monitoring Smart DAQ An Environment Monitoring Smart DAQ is a low-power data acquisition system that connects multiple environmental sensors, collects high-accuracy data in real time, and securely transmits it to central platforms for monitoring, analysis,… See details Bartington Mag-01H D/I System The Mag-01H D/I System pairs a precision single-axis fluxgate magnetometer with a non-magnetic theodolite to measure magnetic declination and inclination with high precision. See details Spherical Transducers (M18C) GeoSpectrum's Spherical Transducers (M18C series) are omnidirectional high-frequency sound sources and receivers used for active/passive sonar, marine mammal detection, and subsea communications. See details Senis Magnetic Field Mapper (MMS-1A-RS/MMS-1X-RS) The Senis Magnetic Field Mapper (MMS-1A-RS/MMS-1X-RS) creates high-resolution 2D/3D maps of magnetic fields around electromagnets or permanent magnets using a simultaneous 3-axis integrated Hall probe. See details Senis 3MH1-E Handheld Teslameter The Senis 3MH1-E is a hand-held, touchscreen teslameter that measures all three magnetic field components with a detachable probe for hard-to-reach locations, across ranges up to 4T. See details Metrolab Fast Digital Integrator, FDI2056 The Metrolab FDI2056 is a high-precision, high-speed digital voltage integrator that, combined with a flux coil, forms an extraordinarily fast and sensitive magnetometer. See details Metrolab PT2025 NMR Teslameter (discontinued) The Metrolab PT2025 (now EOL) is an NMR-based Teslameter offering 5ppm accuracy for precision mapping and calibration of magnetic fields from 0.043T to 13.7T. See details Magneto-Optic Systems and Sensors Magneto-Optic Sensors enable visualization of the vertical magnetic field from a flat surface with down to 1µm spatial resolution and 1µs time resolution. Applications: Hard and soft magnetic material analysis, permanent magnet… See details Senis 3MH2 Digital Transducer The Senis 3MH2 is a high-quality 3-D digital transducer delivering sub-0.1% DC accuracy, sub-1ppm resolution, and USB2.0/LAN connectivity for demanding magnetic field measurement. See details Type 8106 (Low-Noise Hydrophone w/ Preamplifier) The Type 8106 is a low-noise hydrophone with a built-in 10dB preamplifier for absolute underwater sound measurements from 7Hz to 80kHz at depths to 1000m. See details